Screws

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

Timco Timber Frame Construction & Landscaping Screws - Hex - Exterior - Green Organic - 6.7 x 125. Sold individually. Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
Hex head countersunk with a fixed washer. Meets BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance. Single slash point to reduce torque and the risk of timber splitting at low edge distance. 25° sharp point and single lead for a fast start and improved thread acceptance.

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

Timco Timber Frame Construction & Landscaping Screws - Hex - Exterior - Green Organic - 6.7 x 100. Sold individually. Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
Hex head countersunk with a fixed washer. Meets BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance. Single slash point to reduce torque and the risk of timber splitting at low edge distance. 25° sharp point and single lead for a fast start and improved thread acceptance

Timco Timber Frame Construction & Landscaping Screws - Wafer - Exterior - Green Organic - 6.7 x 95 - sold individually. Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Wafer head for improved clamping and a low profile finish with TX30 recess. Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance. Single slash point to reduce torque and the risk of timber splitting at low edge distance. 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

Timco Timber Frame Construction & Landscaping Screws - Wafer - Exterior - Green Organic - 6.7 x 75 - sold individually. Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Wafer head for improved clamping and a low profile finish with TX30 recess. Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance. Single slash point to reduce torque and the risk of timber splitting at low edge distance. 25° sharp point and single lead for a fast start and improved thread acceptance

The Jet Speed Plug Plasterboard Fixing is a metal speed plug in a zinc alloy finish that has a specially designed cutting tip to pierce plasterboard skin. The countersink feature allows flush fitting to plasterboard and the new design flange on the screw head acts as a fixed washer which evenly distributes the load. This fixing is supplied with pozidrive compatible 4.5 x 35Mm round head screws and can be used when re-fixing into existing plug or anchor holes. The screw and fixture can be removed for cleaning and decoration while alternative screws can be used if required. This plug plasterboard fixing can be used in most types of hollow walls and plasterboard.

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

Timco Timber Frame Construction & Landscaping Screws - Hex - Exterior - Green Organic - 6.7 x 75. Sold individually. Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
Hex head countersunk with a fixed washer. Meets BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance. Single slash point to reduce torque and the risk of timber splitting at low edge distance. 25° sharp point and single lead for a fast start and improved thread acceptance.

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel