Drill Bits

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

Trend Craft Pro drill bit guides. For accurately drilling pilot holes centrally to any countersink fitting. 4 piece set. Drill bit guides for No.6, No.8 and No.10 screws.
Self-centring drills for the accurate drilling of pilot holes for fittings such as hinges to ensure exact alignment .
Drill bit guides can easily be dismantled for cleaning and are supplied with a HSS drill bits.

Trend Craft Pro Snappy 4-piece countersink and plug cutter set. This set incorporates two drill countersinks and matching plug cutters.

Plugs cutters are made from Tool Steel and are very slightly tapered.
Use on timber to drill a countersunk hole for a screw which is then plugged uses a plug/pellet made using the plug cutter.
Recommended that plug cutters are used in a pillar drill.

Trend Craft Pro Snappy masonry drill set. Tungsten Carbide Tipped masonry drill bits with colour bands on to allow easy selection of wall plug and allow for setting of drilling depth to suit wall plug.
5mm drill with yellow band.
5.5mm drill with orange band.
6mm drill with red band.
7mm drill with brown band.
8mm drill with grey band.
For drilling into plaster walls, plasterboard, mortar, brick and building blocks.

Trend Snappy Snap/CS/8 Countersink 2.75mm. 9.5mm diameter countersink - with adjustable 2.75mm pilot drill. 9.5mm diameter countersink with pilot drill designed for Imperial screws up to 8 gauge. The perfect, fast swap accessory for clean, consistent finishes. Made from hardened tool steel for assured performance. Ideally suited to hard and softwoods alike. Fitted with high quality 2.75mm diameter replaceable HSS (High Speed Steel) drill designed for piloting work with Imperial screws up to 8 gauge in softwood and 6 gauge in hardwood. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications where the fixings need to be hidden.

Trend Snappy 9.5mm diameter TCT countersink - with adjustable pilot drill.
9.5mm diameter countersink with pilot drill designed for Imperial screws up to 8 gauge. The perfect, fast swap accessory for clean, consistent finishes. TCT cutting tips for assured, long life performance in all timbers and abrasive timber based materials including ply, MDF and chipboard. Fitted with high quality 2.75mm diameter replaceable HSS (High Speed Steel) drill designed for piloting work with Imperial screws up to No8 gauge in softwood and No6 gauge in hardwood. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications where the fixings need to be hidden.

Trend Snappy Snap/CS/12 Countersink 3.5mm. 12.7m diameter countersink - with adjustable 3.5mm pilot drill. 12.7mm diameter countersink with pilot drill designed for Imperial screws up to 8 gauge. The perfect, fast swap accessory for clean, consistent finishes. Made from hardened tool steel for assured performance. Ideally suited to hard and softwoods alike. Fitted with high quality 3.25mm diameter replaceable HSS (High Speed Steel) drill designed for piloting work with Imperial screws up to 8 gauge in softwood and 6 gauge in hardwood. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications where the fixings need to be hidden.

Trend Snappy Snap/CS/10 Countersink 3.25mm. 9.5mm diameter countersink - with adjustable 3.25mm pilot drill. 9.5mm diameter countersink with pilot drill designed for Imperial screws up to 8 gauge. The perfect, fast swap accessory for clean, consistent finishes. Made from hardened tool steel for assured performance. Ideally suited to hard and softwoods alike. Fitted with high quality 3.25mm diameter replaceable HSS (High Speed Steel) drill designed for piloting work with Imperial screws up to 8 gauge in softwood and 6 gauge in hardwood. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications where the fixings need to be hidden.

Trend Snappy Snap/CS/6 Drill Countersink 2.5mm. 9.5mm diameter countersink - with adjustable 2.5mm pilot drill. 9.5mm diameter countersink with pilot drill designed for Imperial No6 gauge screws in softwood. The perfect, fast swap accessory for clean, consistent finishes.
Made from hardened tool steel for assured performance. Ideally suited to hard and softwoods alike. Fitted with high quality 2.5mm diameter replaceable HSS (High Speed Steel) drill Ideal for metric screws up to 5mm gauge. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications where the fixings need to be hidden.

Trend Snappy Snap/CS/4 Drill Countersink 2mm. Trend Snappy 9.5mm diameter countersink with adjustable 2mm drill. 9.5mm diameter countersink with pilot drill designed for Imperial gauge screws. The perfect, fast swap accessory for clean, consistent finishes. Made from hardened tool steel for assured performance. Fitted with high quality 2mm diameter replaceable HSS (High Speed Steel) designed for piloting in hardwoods using No4 Imperial gauge screws. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and also counterbores when used with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications where the fixings need to be hidden.

Trend Snappy Snap/CS/Set Countersink pack of #4, #6, #8, #10 and #12 bits; adjustable for different length screws and can produce a 9.5mm (3/8 inch) diameter or 12.7 mm (1/2 inch diameter counterbored hole for woodplugs.
Pilot drills are designed for Imperial screws up to 8 gauge. The perfect, fast swap accessory for clean, consistent finishes. Made from hardened tool steel for assured performance. Ideally suited to hard and softwoods alike.
Easily adjustable drill length for different timber thicknesses and fast alignment.
Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications where the fixings need to be hidden.

Specification
Shank Diameter=1/4 inch hex
Softwood=No.6 to No.12
Hardwood=No.4 to No.10
Drill dia.=2mm to 3.5 mm
Countersink dia.=9.5 mm & 12.7 mm

Trend Snappy TCT Countersink Set - 5 piece set
A 5 piece set for all your countersinking and piloting needs covering Imperial screw gauges from No4 through to No12.
Pack Includes:
- 1 x 2.0mm (5/64"") drill countersink
- 1 x 2.5mm (3/32"") drill countersink
- 1 x 2.75mm (7/64"") drill countersink
- 1 x 3.25mm (1/8"") drill countersink
- 1 x 3.5mm (9/64"") drill countersink with
-9.5mm and 12.7mm counterbore diameters.

TCT cutting tips for assured, long life performance in all timbers and abrasive timber based materials including ply, MDF and chipboard. Adjustable drilling depth to suit material thickness with easily replaceable drills should any damage occur.
Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications where the fixings need to be hidden.

Trend Snappy 12.7mm diameter TCT countersink - with adjustable pilot drill. 12.7mm diameter countersink for up to 12 gauge Imperial screws. The perfect, fast swap accessory for clean, consistent finishes. TCT cutting tips for assured, long life performance in all timbers and abrasive timber based materials including ply, MDF and chipboard. Fitted with high quality 3.5mm diameter replaceable HSS (High Speed Steel) piloting drill for No10 screws in hardwood and No12 screws in softwood. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/127T or SNAP/PC/12 Plug Cutters for applications where the fixings need to be hidden.

Trend Snappy 9.5mm diameter TCT countersink - with adjustable pilot drill. 9.5mm diameter countersink for up to 10 gauge Imperial screws.The perfect, fast swap accessory for clean, consistent finishes. TCT cutting tips for assured, long life performance in all timbers and abrasive timber based materials including ply, MDF and chipboard. Fitted with high quality 3.25mm diameter replaceable HSS (High Speed Steel) piloting drill for No 10 Imperial screws in softwood or No8 screws in hardwood. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications where the fixings need to be hidden.

15mm Vitrex Diamond Grit Edged Drill Bit for drilling hard tiles. The slotted bit design makes for easy waste removal. It is suitable for drilling porcelain, granite, quarry, stone, marble, terracotta and ceramic tiles. Weight: 36g.

25mm Vitrex Diamond Grit Edged Drill Bit for drilling hard tiles. The slotted bit design makes for easy waste removal. It is suitable for drilling porcelain, granite, quarry, stone, marble, terracotta and ceramic tiles. Weight: 59g.

10mm Vitrex Diamond Grit Edged Drill Bit for drilling hard tiles. The slotted bit design makes for easy waste removal. It is suitable for drilling porcelain, granite, quarry, stone, marble, terracotta and ceramic tiles. Weight: 25g.

12mm Vitrex Diamond Grit Edged Drill Bit for drilling hard tiles. The slotted bit design makes for easy waste removal. It is suitable for drilling porcelain, granite, quarry, stone, marble, terracotta and ceramic tiles. Weight: 34g.

18mm Vitrex Diamond Grit Edged Drill Bit for drilling hard tiles. The slotted bit design makes for easy waste removal. It is suitable for drilling porcelain, granite, quarry, stone, marble, terracotta and ceramic tiles. Weight: 39g.

22mm Vitrex Diamond Grit Edged Drill Bit for drilling hard tiles. The slotted bit design makes for easy waste removal. It is suitable for drilling porcelain, granite, quarry, stone, marble, terracotta and ceramic tiles. Weight: 51g.

6mm Vitrex Diamond Grit Edged Drill Bit for drilling hard tiles. The slotted bit design makes for easy waste removal. It is suitable for drilling porcelain, granite, quarry, stone, marble, terracotta and ceramic tiles. Weight: 18g.

8mm Vitrex Diamond Grit Edged Drill Bit for drilling hard tiles. The slotted bit design makes for easy waste removal. It is suitable for drilling porcelain, granite, quarry, stone, marble, terracotta and ceramic tiles. Weight: 21g.

The Vitrex Tile and Glass Drill Bits have a tungsten carbide tip, which gives them excellent strength and durability. The precision 'spearhead' design prevents chipping or breaking. They are ideal for drilling tiles and glass.

The Vitrex Tile and Glass Drill Bits have a tungsten carbide tip, which gives them excellent strength and durability. The precision 'spearhead' design prevents chipping or breaking. They are ideal for drilling tiles and glass.

The Vitrex Tile and Glass Drill Bits have a tungsten carbide tip, which gives them excellent strength and durability. The precision 'spearhead' design prevents chipping or breaking. They are ideal for drilling tiles and glass.

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in).

Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in). Available in different sizes.

The DEWALT DT70708 Drill Drive Set is supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation.