Drill Bits

A high performance wood drill for drilling a deep hole into various types of timber in a bright and black finish. Made from high grade carbon Steel with a screw point.

A high performance wood drill for drilling a deep hole into various types of timber in a bright and black finish. Made from high grade carbon Steel with a screw point.

A high performance wood drill for drilling a deep hole into various types of timber in a bright and black finish. Made from high grade carbon Steel with a screw point.

A high performance wood drill for drilling a deep hole into various types of timber in a bright and black finish. Made from high grade carbon Steel with a screw point.

A high performance wood drill for drilling a deep hole into various types of timber in a bright and black finish. Made from high grade carbon Steel with a screw point.

A high performance wood drill for drilling a deep hole into various types of timber in a bright and black finish. Made from high grade carbon Steel with a screw point.

A high performance wood drill for drilling a deep hole into various types of timber in a bright and black finish. Made from high grade carbon Steel with a screw point.

A high performance wood drill for drilling a deep hole into various types of timber in a bright and black finish. Made from high grade carbon Steel with a screw point.

A high performance wood drill for drilling a deep hole into various types of timber in a bright and black finish. Made from high grade carbon Steel with a screw point.

For drilling small diameter holes into various types of timber and man-made boards. Made from high grade High Speed Steel for longer life, fully grounded and has up to 3x the heat resistance of standard carbon Steel bits.

For drilling small diameter holes into various types of timber and man-made boards. Made from high grade High Speed Steel for longer life, fully grounded and has up to 3x the heat resistance of standard carbon Steel bits.

For drilling small diameter holes into various types of timber and man-made boards. Made from high grade High Speed Steel for longer life, fully grounded and has up to 3x the heat resistance of standard carbon Steel bits.

For drilling small diameter holes into various types of timber and man-made boards. Made from high grade High Speed Steel for longer life, fully grounded and has up to 3x the heat resistance of standard carbon Steel bits.

For drilling small diameter holes into various types of timber and man-made boards. Made from high grade High Speed Steel for longer life, fully grounded and has up to 3x the heat resistance of standard carbon Steel bits.

For drilling small diameter holes into various types of timber and man-made boards. Made from high grade High Speed Steel for longer life, fully grounded and has up to 3x the heat resistance of standard carbon Steel bits.

For drilling small diameter holes into various types of timber and man-made boards. Made from high grade High Speed Steel for longer life, fully grounded and has up to 3x the heat resistance of standard carbon Steel bits.

20mm, 22mm and 25mm 3x Blue Groove Power Bit Set. Blue Groove is the world's first wood drill bit to use IRWIN's pioneering bi-metal technology, creating a drill bit with unrivalled speed and durability even in nail-embedded wood. Designed for high-speed precision drilling, it marks an end to the frustration that tradesmen experience when their drill bits strike a nail, frequently causing standard flat bits to become locked or break. The secret behind Blue Groove Power's extraordinary strength is IRWIN's bi-metal technology, a composition of two high performance components, high speed steel and carbon steel, which both have their own attributes and benefits. The high-speed steel edge provides durability and allows nail cutting, while the carbon steel body gives the bit flexibility. Each bit in the Blue Groove Power range has a self-feeding tip which helps to pull it through materials, as well as three cutting edges which enhance chip removal for a fast, clean hole.

14mm, 16mm and 18mm 3x Blue Groove Power Bit Set. Blue Groove is the world's first wood drill bit to use IRWIN's pioneering bi-metal technology, creating a drill bit with unrivalled speed and durability even in nail-embedded wood. Designed for high-speed precision drilling, it marks an end to the frustration that tradesmen experience when their drill bits strike a nail, frequently causing standard flat bits to become locked or break. The secret behind Blue Groove Power's extraordinary strength is IRWIN's bi-metal technology, a composition of two high performance components, high speed steel and carbon steel, which both have their own attributes and benefits. The high-speed steel edge provides durability and allows nail cutting, while the carbon steel body gives the bit flexibility. Each bit in the Blue Groove Power range has a self-feeding tip which helps to pull it through materials, as well as three cutting edges which enhance chip removal for a fast, clean hole.

5.5mm x 160mm Irwin Cordless Multi-Purpose Drill Bit designed for cordless, low speed multi-purpose drilling. This drill bit offers around 10% extra battery life per charge. It has a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork. Only one drill bit is needed to do the job and will drill a wide selection of different materials like brickwork, ceramic tiles, breeze blocks, wood, dry wall, gypsum board, limestone, slate, marble, eternite and plastics. Length: 160mm. Diameter: 5.5mm. Flute Length: 109mm.

5.5mm x 95mm Irwin Cordless Multi-Purpose Drill Bit designed for cordless, low speed multi-purpose drilling. This drill bit offers around 10% extra battery life per charge. It has a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork. Only one drill bit is needed to do the job and will drill a wide selection of different materials like brickwork, ceramic tiles, breeze blocks, wood, dry wall, gypsum board, limestone, slate, marble, eternite and plastics. Length: 95mm. Diameter: 5.5mm. Flute Length: 49mm.

7mm x 110mm Irwin Cordless Multi-Purpose Drill Bit designed for cordless, low speed multi-purpose drilling. This drill bit offers around 10% extra battery life per charge. It has a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork. Only one drill bit is needed to do the job and will drill a wide selection of different materials like brickwork, ceramic tiles, breeze blocks, wood, dry wall, gypsum board, limestone, slate, marble, eternite and plastics. Length: 110mm. Diameter: 7mm. Flute Length: 59mm.

7mm x 160mm Irwin Cordless Multi-Purpose Drill Bit designed for cordless, low speed multi-purpose drilling. This drill bit offers around 10% extra battery life per charge. It has a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork. Only one drill bit is needed to do the job and will drill a wide selection of different materials like brickwork, ceramic tiles, breeze blocks, wood, dry wall, gypsum board, limestone, slate, marble, eternite and plastics. Length: 160mm. Diameter: 7mm. Flute Length: 109mm.

7-Piece Masonry Drill Bit Set containing 4mm, 5mm, 6mm, 7mm, 8mm, 10mm and 12mm Irwin Masonry Drills Bits, designed for fast and efficie nt drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.

The Ox Contractor Metal 5 Core & Accessories Case is crafted from premium quality materials making the Ox Contractor Case durable, robust and built to last rough use. The Ox Contractor Set comes with a set of five drills, 38mm, 52mm, 65mm, 117mm, and 127mm. The Ox Contractor Metal 5 Set includes Hex and SDS plus arbours, 1/2 inch BSP 250mm solid extension, 13mm a taper drill, guide rod and a drift key.

Spectrum dry core accessories are manufactured from the highest grade steel to ensure thatthey can withstand the toughest use.
Zinc plating enhances the visual appearance and protects against against rust without leavingoil deposits.The most complete range of accessories to cover all machinery options and personal preferences.

A high performance drill bit with a superior European carbide tip to give extended durability. Rebar drilling will result in Reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank, a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. Rebar drilling will result in Reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank, a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. Rebar drilling will result in Reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank, a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. Rebar drilling will result in Reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank, a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. Rebar drilling will result in Reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank, a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in Reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in Reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in Reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

Reisser Drill Bit Set 19pc in a durable plastic case.

Reisser Drill Bit Set 10pc.

Tayler Tools 13pc TiN flat wood bit set in a wooden storage box. contains: 6mm, 8mm, 10mm, 12mm, 13mm, 14mm, 16mm, 18mm, 19mm, 20mm, 22mm, 24mm, and 25mm bits

Tayler Tools 19pc HSS Jobber drill set supplied in a metal storage case contains: 1.0mm - 10.0mm x 0.5mm

Suitable for the dry drilling of porcelain, marble, granite and travertine tiles. Revolutionary new wax filled design that requires no water. Use an electric drill at 2000-3000 rpm. Hole size suitable for 15mm copper pipe.

Suitable for the dry drilling of porcelain, marble, granite and travertine tiles. Revolutionary new wax filled design that requires no water. Use an electric drill at 2000-3000 rpm. Hole size suitable for Plasplugs red super grips or similar.

Suitable for the dry drilling of porcelain, marble, granite and travertine tiles. Revolutionary new wax filled design that requires no water. Use an electric drill at 2000-3000 rpm. Hole size suitable for Plasplugs brown super grips or similar.

Suitable for the dry drilling of porcelain, marble, granite and travertine tiles and many other surfaces with a revolutionary new design that requires no water. Use an angle grinder Max RPM 6000-11000. To prolong drill bit life Tile Rite recommend dipping the drill bit in water every 30 seconds. Cool drill bit for 30 seconds after each hole. Hole size suitable for Plasplugs red super grips or similar.

Suitable for the dry drilling of porcelain, marble, granite and travertine tiles and many other surfaces with a revolutionary new design that requires no water. Use an angle grinder Max RPM 6000-11000. To prolong drill bit life Tile Rite recommend dipping the drill bit in water every 30 seconds. Cool drill bit for 30 seconds after each hole. Hole size suitable for 22mm copper pipe.

Suitable for the dry drilling of porcelain, marble, granite and travertine tiles and many other surfaces with a revolutionary new design that requires no water. Use an angle grinder Max RPM 6000-11000. To prolong drill bit life Tile Rite recommend dipping the drill bit in water every 30 seconds. Cool drill bit for 30 seconds after each hole. Hole size suitable for 32Mm waste pipe.

Suitable for the dry drilling of porcelain, marble, granite and travertine tiles and many other surfaces with a revolutionary new design that requires no water. Use an angle grinder Max RPM 6000-11000. To prolong drill bit life Tile Rite recommend dipping the drill bit in water every 30 seconds. Cool drill bit for 30 seconds after each hole. Hole size suitable for Plasplugs red super grips or similar.

Suitable for the dry drilling of porcelain, marble, granite and travertine tiles and many other surfaces with a revolutionary new design that requires no water. Use an angle grinder Max RPM 6000-11000. To prolong drill bit life Tile Rite recommend dipping the drill bit in water every 30 seconds. Cool drill bit for 30 seconds after each hole. Hole size suitable for Plasplugs red super grips or similar.

Suitable for the wet drilling of porcelain, marble, granite and travertine tiles with a nickel plated body and an electro plated diamond cutting rim with a straight shank that fits all drill chucks. For best results use with Tile Rite universal guide and cooling system. Hole size suitable for 15mm copper pipe.

Suitable for the wet drilling of porcelain, marble, granite and travertine tiles with a nickel plated body and an electro plated diamond cutting rim with a straight shank that fits all drill chucks. For best results use with Tile Rite universal guide and cooling system. Hole size suitable for red wall plug.

Suitable for the wet drilling of porcelain, marble, granite and travertine tiles with a nickel plated body and an electro plated diamond cutting rim with a straight shank that fits all drill chucks. For best results use with Tile Rite universal guide and cooling system. Hole size suitable for brown solid wall plug.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.