Pipes & Fittings

THE PLASSON FEMALE THREADED OFFTAKE ELBOW IS IDEALLY USED FOR CONVEYING WATER AND OTHER FLUIDS IN INFRASTRUCTURE, AGRICULTURE AND HORTICULTURE APPLICATIONS. AVAILABLE IN VARIOUS SIZES.

The Plasson Metric-Imperial Coupler is ideally used for conveying water and other fluids in infrastructure, agriculture and horticulture applications with mechanical compression fittings tested to withstand working pressures of up to 16 bar. This coupler has impressive stress resistance and is easy to install with a leak free seal. This coupler connects to many pipe types and materials. WRAS approved.

PLASSON COPPER ADAPTOR IDEALLY USED FOR CONVEYING WATER AND OTHER FLUIDS IN INDUSTRY AND AGRICULTURE APPLICATIONS, THE PLASSON REDUCING ADAPTOR FOR COPPER PIPES REPLACES THE EXISTING CONNECTION WITHIN A WATER SYSTEM, PROVIDING YOU WITH A WATERTIGHT COMPRESSION FIT. THE DURABLE, PLASTIC DESIGN HAS VERY GOOD STRENGTH AND STRESS RESISTANCE, PROVIDING A LONG LASTING CONNECTION THAT WILL KEEP A SYSTEM LEAK FREE. MACHINED TO WITHSTAND 16 BAR PRESSURE, THE REDUCING ADAPTOR IS NOT SUITABLE FOR HOT WATER SYSTEMS, BUT CAN WITHSTAND SUB-ZERO TEMPERATURES. AVAILABLE IN VARIOUS SIZES.

PLASSON UNIVERSAL COMPRESSION REDUCING COUPLING USED FOR CONNECTING WATER MAINS PIPES AND ANY WATER SUPPLY PIPES IN INFRASTRUCTURE, AGRICULTURE AND HORTICULTURE.
AVAILABLE IN VARIOUS SIZES.

PLASSON ELBOW WALL PLATE IDEALLY USED FOR CONVEYING WATER AND OTHER FLUIDS IN APPLICATION FOR INDUSTRY, AGRICULTURE AND MORE. THE PLASSON WALL PLATE ELBOW PROVIDES A LEAK FREE CONVERSION BETWEEN A 20 MM FEMALE THREADING TO A 1/2 INCH COMPRESSION FIT. THIS WALL PLATE HAS A ROBUST DESIGN AND HAS BEEN MACHINED TO WITHSTAND PRESSURES OF UP TO 16 BAR, WHILE INCLUDING SUPERIOR FROST AND STRESS RESISTANCE. THE SIMPLE TO USE WALL MOUNT IS CONVENIENT AND THE 90 DEGREE ELBOW ALLOWS FOR THE INSTALLATION IN TIGHT AREAS. AVAILABLE IN VARIOUS SIZES.

PLASSON CLASS C ADAPTOR ARE MECHANICAL COMPRESSION FITTINGS TESTED TO WITHSTAND WORKING PRESSURES OF UP TO 16 BAR. EASY TO INSTALL WITH A LEAK FREE SEAL AND CAN CONNECT TO MANY PIPE TYPES AND MATERIALS. WRAS APPROVED. AVAILABLE IN VARIOUS SIZES.

PLASSON LOW DENSITY CLASS D COMPRESSION FIT PIPE CONNECTOR, IDEALLY USED FOR CONVEYING WATER AND OTHER FLUIDS IN INDUSTRY AND AGRICULTURE APPLICATIONS. AVAILABLE IN VARIOUS SIZES.

PLASSON CLASS C HIGH DENSITY CONNECTOR, IDEALLY USED FOR CONVEYING WATER AND OTHER FLUIDS IN INDUSTRY AND AGRICULTURE APPLICATIONS. TESTED TO WITHSTAND WORKING PRESSURES OF 16 BAR, THIS CONNECTOR PROVIDES A LEAK FREE SEAL WITHIN A WATER SYSTEM. AVAILABLE IN VARIOUS SIZES.

PLASSON CLASS D HIGH DENSITY CONNECTOR, IDEALLY USED FOR CONVEYING WATER AND OTHER FLUIDS IN INDUSTRY AND AGRICULTURE APPLICATIONS. TESTED TO WITHSTAND WORKING PRESSURES OF 16 BAR, THIS CONNECTOR PROVIDES A LEAK FREE SEAL WITHIN A WATER SYSTEM. AVAILABLE IN VARIOUS SIZES.

PLASSON UNIVERSAL ADAPTOR IDEALLY USED FOR CONVEYING WATER AND OTHER FLUIDS IN URBAN AND INTER-URBAN INFRASTRUCTURE, INDUSTRIAL, MINING, LANDSCAPE, AND FARMING APPLICATIONS. AVAILABLE IN VARIOUS SIZES.

PLASSON REDUCING COUPLER USED FOR CONNECTING WATER MAINS PIPES AND ANY WATER SUPPLY PIPES IN INFRASTRUCTURE, AGRICULTURE AND HORTICULTURE WITH MECHANICAL COMPRESSION FITTINGS TESTED TO WITHSTAND PRESSURES OF UP TO 16 BAR. AVAILABLE IN VARIOUS SIZES.

PLASSON PIPE LINER IS USED FOR CONNECTING WATER MAINS PIPES AND ANY WATER SUPPLY PIPES IN INFRASTRUCTURE, AND AGRICULTURE WITH A WELL-ENGINEERED SYSTEM FOR JOINING PE PIPES. THIS PIPE LINER CAN TOLERATE TEMPERATURES BELOW 0°C AND IS EASY TO USE AND RELIABLE DUE TO ITS HEAVY DUTY CONSTRUCTION. THIS PIPE LINER HAS A 50 YEAR LIFE AND REQUIRES NOT TOOLS TO USE. WRAS APPROVED. AVAILABLE IN VARIOUS SIZES.

PLASSON NORMAL GAUGE IDEALLY USED FOR CONVEYING WATER AND OTHER FLUIDS IN INDUSTRY AND AGRICULTURE APPLICATIONS, THE PLASSON NORMAL GAUGE REDUCING ADAPTOR REPLACES THE EXISTING CONNECTION WITHIN A WATER SYSTEM, PROVIDING YOU WITH A WATERTIGHT COMPRESSION FIT. AVAILABLE IN VARIOUS SIZES.

PLASSON HEAVY GAUGE ADAPTOR IS A WRAS-APPROVED SOLUTION DESIGNED TO FIT INSIDE METRIC COMPRESSION FITTINGS, MAKING THEM COMPATIBLE WITH IMPERIAL PIPES. AVAILABLE IN VARIOUS SIZES.

PLASSON UNIVERSAL STOP TAP PROVIDES A RELIABLE WATER TIGHT SEAL WITHIN A WATER SYSTEM, ENSURING THE WATER IS COMPLETELY TURNED OFF IF A LEAK DEVELOPS. USED FOR CONVEYING WATER AND OTHER FLUIDS IN INDUSTRY AND AGRICULTURE APPLICATIONS. AVAILABLE IN VARIOUS SIZES.

PLASSON WALL PLATE ELBOW ARE MECHANICAL FITTINGS THAT OFFER SOLUTIONS FOR CONNECTING PE PIPES AND ARE USED FOR CONVEYING WATER AND OTHER FLUIDS IN AGRICULTURE AND INDUSTRY. AVAILABLE IN VARIOUS SIZES.

Plasson Mech Black 2 Black Coupling WRAS approved product - suitable for drinking water systems.

Plasson Black 2 Blue Metric to Imperial Slip coupler is designed to connect metric MDPE mains water pipe (blue or black) to older Imperial pipes (black)

Plasson Pushfit Black 2 Blue Coupling, coupler metric to imperial.

½" BSP swivel x 15 mm Polyplumb bent tap connector. Supplied with EPDM washer. Hand tighten nut, plus ¼ turn with spanner. NOT for central heating.. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

The Polyplumb Branch Reduce Tee is a part of a hard-working and durable grey plumbing system.

Polyplumb Elbow 90 Degree in Grey.

Polyplumb Elbow 90 Degree in Grey.

PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

The Polyplumb is an integrated flexible plumbing system, incorporating polybutylene pipes and a complementary range of push-fit fittings. It can be used in domestic hot and cold water supply, and radiator and floor heating installations. This Polyplumb Equal Tee is a time efficient, no nonsense one step joint process that is suitable for domestic. The high performance stainless steel grab ring ensures superb joint integrity. Mad from Polybutylene and Stainless Steel.

The Polyplumb is an integrated flexible plumbing system, incorporating polybutylene pipes and a complementary range of push-fit fittings. It can be used in domestic hot and cold water supply, and radiator and floor heating installations. This Polyplumb Equal Tee is a time efficient, no nonsense one step joint process that is suitable for domestic. The high performance stainless steel grab ring ensures superb joint integrity. Mad from Polybutylene and Stainless Steel.

The Polyplumb Pipe Stiffener provides a pipe with additional support.

The Polyplumb Pipe Stiffener provides a pipe with additional support.

The 20 mm x 15 mm MDPE pushfit stopcock is a fully demountable and reusable push-fit system for hot and cold plumbing and radiator central heating systems. The radial sealing force provides a more secure watertight seal and the 3-pin protection feature ensures fittings are not accidentally demounted when installing through joists, floors or walls.

One end spigot. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

10 mm Demountable Socket Blank End Polyplumb is the fast and permanent grey plastic pushfit system for domestic hot and cold water supply, radiator and floor heating installations. Fittings feature stainless steel grab ring and are demountable only by disassembling, reducing the potential for tampering. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

The Polyplumb Socket Blank End is a part of a hard-working and durable grey plumbing system.

The Polyplumb Socket Blank End is a part of a hard-working and durable grey plumbing system.

22 x 15 mm socket reducing, grey. Supplied with reinforcing sleeve. Spigot x socket. NOT suitable for use with compression fittings. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations. Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler. NOT suitable for use with compression fittings.

The Polyplumb Sprigot Blank End is a part of a hard-working and durable grey plumbing system.

22 mm Spigot Blank End Polyplumb is the fast and permanent grey plastic pushfit system for domestic hot and cold water supply, radiator and floor heating installations. Fittings feature stainless steel grab ring and are demountable only by disassembling, reducing the potential for tampering. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

Polyplumb is an integrated flexible plumbing system, incorporating polybutylene pipes and a complimentary range of push-fit fittings. It can be used in hot and cold water supply, and radiator and floor heating installations. It is a fast, reliable and permanent fitting being used for over 30 years and provides a superb combination of fast fitting with a permanent, reliable fix. Polyplumb offers a one-step joint process, with joint integrity assured by a high performance, stainless steel grab ring within the fitting. Polyplumb can only be demounted by dis-assembly, reducing the risk of tampering. The system offers a number of benefits, including a high performance stainless steel grab ring ensures superb joint integrity. This system is time efficient, no nonsense one step joint process and is demountable only by dis-assembling, reducing potential for tampering.

PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

Polyplumb Straight Coupler in Grey.

Polyplumb Straight Coupler in Grey.

The Polyplumb Straight Tap Connector is a part of a hard-working and durable grey plumbing system.

The Polyplumb Straight Tap Connector is a part of a hard-working and durable grey plumbing system.

15 mm x 1/2" BSP parallel male Polyplumb tank connector. Colour: grey. Supplied with EPDM washer. Hand tighten. for cold water. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

This compression fitting are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. Compression Fittings do not require the use of solder, are ideal for use in areas with limited space, and are a cost effective but robust solution.

This Speedfit Coupling is used in the connection of copper to copper pipe, plastic to plastic pipe or copper to plastic pipe. The fittings simply push onto the pipe and then the plastic nut is twisted clockwise to lock the fitting in place. The pipe must be cut straight to ensure a good connection is made.

This Speedfit Coupling is used in the connection of copper to copper pipe, plastic to plastic pipe or copper to plastic pipe. The fittings simply push onto the pipe and then the plastic nut is twisted clockwise to lock the fitting in place. The pipe must be cut straight to ensure a good connection is made.

This Speedfit Coupling is used in the connection of copper to copper pipe, plastic to plastic pipe or copper to plastic pipe. The fittings simply push onto the pipe and then the plastic nut is twisted clockwise to lock the fitting in place. The pipe must be cut straight to ensure a good connection is made.

This Speedfit Reducing Coupling is used in the connection of copper to copper pipe, plastic to plastic pipe or copper to plastic pipe. The fittings simply push onto the pipe and then the plastic nut is twisted clockwise to lock the fitting in place. The pipe must be cut straight to ensure a good connection is made.

Solder Ring Connector.

Solder Ring Coupling.

Solder Ring Coupling.

Solder Ring Coupling.

Solder Ring Coupling.

Solder Ring Reducing Coupling.

Solder ring fittings are for use with both hot and cold water systems. The fittings have been pre-soldered with a small ring just inside each end.

Solder Ring Reducing Coupling.

Solder Ring Reducing Coupling.

Solder Ring Stop end.

Solder Ring Stop end.

Solder Ring Stop end.

Solder ring fittings are for use with both hot and cold water systems. The fittings have been pre-soldered with a small ring just inside each end.

Solder Ring Stop end.

Coupling for a Waste Outlet.