Pipes & Fittings

Solder Ring Stop end.

Solder Ring Stop end.

Copper Tube Length Table in a Chrome Plated finish.

The Polyplumb Pipe Stiffener provides a pipe with additional support.

The Polyplumb Pipe Stiffener provides a pipe with additional support.

The Polyplumb Socket Blank End is a part of a hard-working and durable grey plumbing system.

The Polyplumb Socket Blank End is a part of a hard-working and durable grey plumbing system.

10 mm Demountable Socket Blank End Polyplumb is the fast and permanent grey plastic pushfit system for domestic hot and cold water supply, radiator and floor heating installations. Fittings feature stainless steel grab ring and are demountable only by disassembling, reducing the potential for tampering. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

22 mm Spigot Blank End Polyplumb is the fast and permanent grey plastic pushfit system for domestic hot and cold water supply, radiator and floor heating installations. Fittings feature stainless steel grab ring and are demountable only by disassembling, reducing the potential for tampering. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

The Polyplumb Sprigot Blank End is a part of a hard-working and durable grey plumbing system.

The 20 mm x 15 mm MDPE pushfit stopcock is a fully demountable and reusable push-fit system for hot and cold plumbing and radiator central heating systems. The radial sealing force provides a more secure watertight seal and the 3-pin protection feature ensures fittings are not accidentally demounted when installing through joists, floors or walls.

½" BSP swivel x 15 mm Polyplumb bent tap connector. Supplied with EPDM washer. Hand tighten nut, plus ¼ turn with spanner. NOT for central heating.. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

The Polyplumb Straight Tap Connector is a part of a hard-working and durable grey plumbing system.

The Polyplumb Straight Tap Connector is a part of a hard-working and durable grey plumbing system.

15 mm x 1/2" BSP parallel male Polyplumb tank connector. Colour: grey. Supplied with EPDM washer. Hand tighten. for cold water. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

22 x 15 mm socket reducing, grey. Supplied with reinforcing sleeve. Spigot x socket. NOT suitable for use with compression fittings. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations. Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler. NOT suitable for use with compression fittings.

Polyplumb is an integrated flexible plumbing system, incorporating polybutylene pipes and a complimentary range of push-fit fittings. It can be used in hot and cold water supply, and radiator and floor heating installations. It is a fast, reliable and permanent fitting being used for over 30 years and provides a superb combination of fast fitting with a permanent, reliable fix. Polyplumb offers a one-step joint process, with joint integrity assured by a high performance, stainless steel grab ring within the fitting. Polyplumb can only be demounted by dis-assembly, reducing the risk of tampering. The system offers a number of benefits, including a high performance stainless steel grab ring ensures superb joint integrity. This system is time efficient, no nonsense one step joint process and is demountable only by dis-assembling, reducing potential for tampering.

PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

One end spigot. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

The Polyplumb Branch Reduce Tee is a part of a hard-working and durable grey plumbing system.

PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

The Polyplumb is an integrated flexible plumbing system, incorporating polybutylene pipes and a complementary range of push-fit fittings. It can be used in domestic hot and cold water supply, and radiator and floor heating installations. This Polyplumb Equal Tee is a time efficient, no nonsense one step joint process that is suitable for domestic. The high performance stainless steel grab ring ensures superb joint integrity. Mad from Polybutylene and Stainless Steel.

The Polyplumb is an integrated flexible plumbing system, incorporating polybutylene pipes and a complementary range of push-fit fittings. It can be used in domestic hot and cold water supply, and radiator and floor heating installations. This Polyplumb Equal Tee is a time efficient, no nonsense one step joint process that is suitable for domestic. The high performance stainless steel grab ring ensures superb joint integrity. Mad from Polybutylene and Stainless Steel.

PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

Polyplumb Elbow 90 Degree in Grey.

Polyplumb Elbow 90 Degree in Grey.

Polyplumb Straight Coupler in Grey.

Polyplumb Straight Coupler in Grey.

PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

End Feed Bent Tap Connector made from copper.

End Feed Imperial Adaptor Coupling made from copper.

End Feed Female Coupling made from copper.

End Feed 90 Degree Street Elbow made from copper.

End Feed Reducing Tee made from copper.

End Feed Reducing Tee made from copper.

End Feed 90 Degree Street Elbow made from copper.

End Feed Straight Tap Connector made from copper.

End Feed Straight Tap Connector made from copper.

End Feed Straight Tap Connector made from copper.

End Feed Reducing Coupler made from copper.

End Feed Stop End made from copper.

End Feed Fitting Reducer made from copper.

End Feed Equal Tee made from copper.

90 Degree End Feed Elbow made from copper.

End Feed Coupling made from Copper.

End Feed Fitting Reducer made from copper.

End Feed Equal Tee made from copper.

90 Degree End Feed Elbow made from copper.

Suitable for use above ground and on hot or cold domestic systems. The end feed joint is made when copper tube is inserted into the fitting, the joint heated to the correct temperature, and solder applied until the joint becomes molten.

Compatible with Copper Tube to BS EN 1057
Manufactured to EN1254-2
Easy to install

End Feed Fitting Reducer.

90 Degree End Feed Elbow made from copper.

End Feed Coupling made from Copper.

End Feed Coupling made from Copper.

End Feed Stop End made from copper.

End Feed Equal Tee made from copper.

End Feed 90 Degree Elbow made from copper.

End Feed Coupling made from Copper.

End Feed Reducing Coupler made from copper.

End Feed Reducing Coupler made from copper.

End Feed Stop End made from copper.

End Feed Equal Tee made from copper.

End Feed 90 Degree Elbow made from copper.

End Feed Coupling made from Copper.

Straight length copper tube, 22mm in diameter and 0.9mm thick wall sold per 3m length for small domestic installations and large commercial projects.

Straight length copper tube, 15mm in diameter and 0.7mm thick wall sold per 3m length for small domestic installations and large commercial projects.