Below Ground Drainage

100 x 600 x 600 adjusting unit seating ring by F.P. McCann. The concrete ring sits on top of a manhole cover, eliminating the need to lay engineering bricks. Its comprehensive strength is comparable to Class B engineering bricks.

100 x 675 x 675 adjusting unit seating ring by F.P. McCann. The concrete ring sits on top of a manhole cover, eliminating the need to lay engineering bricks. Its comprehensive strength is comparable to Class B engineering bricks.

Brett Martin Back Inlet Roddable Gully Round Grid

● Quick & Easy to Install.
● Suitable for pedestrian areas only.
● Easy access for rodding.
● Removal basket, dip-tube & trap.
● Double trapped to eliminate .

Brett Martin Back Inlet Roddable Gully Rectangular Grid

● Quick & Easy to Install.
● Suitable for pedestrian areas only.
● Easy to Joint.
● Easy access for rodding.
● Double trapped to eliminate .

Brett Martin Back Inlet Roddable Gully Square Grid

● Quick & Easy to Install.
● Suitable for pedestrian areas only.
● Easy to Joint.
● Easy access for rodding.
● Double trapped to eliminate .

Brett Martin Round Hopper And Grid

● Quick & Easy to Install.
● Suitable for pedestrian areas only.
● Easy to Joint.
● Easy access for rodding.
● Double trapped to eliminate .

Brett Martin Rectangular Hopper And Grid

● Quick & Easy to Install.
● Suitable for pedestrian areas only.
● Easy to Joint.
● Easy access for rodding.
● Double trapped to eliminate .

Brett Martin Square Hopper And Grid

● Quick & Easy to Install.
● Suitable for pedestrian areas only.
● Easy to Joint.
● Easy access for rodding.
● Double trapped to eliminate .

Brett Martin Back Inlet Gully Raising Piece

● Suitable for 110mm drainage layouts.
● Lightweight.
● Easy to install.
● Durable.
● Manufactured in the UK.

Brett Martin Paving Collar

● For use with square hopper (B1006).
● Lightweight.
● Easy to install.
● Durable.
● Manufactured in the UK.

Naylor Densleeve underground clay drainage system of plain-end vitrified clay pipes and fittings with flexible sleeve couplings, was developed for building drainage and associated sewerage and is manufactured to comply with the stringent requirements of BS EN295. Sizes are DN100-DN300.

Naylor Densleeve Couplings

Naylor Agri-Drain Perforated Land Drainage is a single wall, corrugated pipe manufactured from high-density polyethylene allowing fast and easy installation and excellent water flow suitable for agricultural use to reduce surface water run-off‎.

Naylor Agri-Drain Perforated Land Drainage is a single wall, corrugated pipe manufactured from high-density polyethylene allowing fast and easy installation and excellent water flow suitable for agricultural use to reduce surface water run-off‎.

Naylor Agri-Drain Perforated Land Drainage is a single wall, corrugated pipe manufactured from high-density polyethylene allowing fast and easy installation and excellent water flow suitable for agricultural use to reduce surface water run-off‎.

Brett Martin Low Trapped Gully 110mm

● Suitable for 110mm drainage layouts.
● Lightweight.
● Easy to install.
● Durable.
● Manufactured in the UK.

Brett Martin Hopp.Integral (Including Grid)

● Quick & Easy to Install.
● Suitable for 110mm drainage layouts.
● Durable.
● Manufactured in the UK.

Brett Martin Sq Hopper 160mm Solv Socket

● Quick & Easy to Install.
● Removable grid cover.
● Durable.
● Manufactured in the UK.

Brett Martin Hopp. Sq. 160 X 110mm + Grid

● Quick & Easy to Install.
● Removable grid cover.
● Durable.
● Manufactured in the UK.

Brett Martin Hopp.Sq.160X110mm+Back Inl+Gd

● Quick & Easy to Install.
● Lightweight.
● Durable.
● Manufactured in the UK.

Brett Martin Hopper Extension Square

● Quick & Easy to Install.
● Lightweight.
● Durable.
● Manufactured in the UK.

MetroDuct Twinwall Bends are supplied plain ended. Please order couplings separately. Inside/Outside diameter: 94mm/110mm.

MetroDuct Twinwall Bends are supplied plain ended. Please order couplings separately. Inside/Outside diameter: 94mm/110mm.

Outside diameter: 110mm. Made with recycled plastic.

Black MetroDuct Twinwall Coiled Ducting is supplied with pre-installed draw sting and coupling. Length: 50m. Inside/Outside diameter: 94mm/110mm.

Orange MetroDuct Twinwall Coiled Ducting is supplied with pre-installed draw sting and coupling. Length: 50m. Inside/Outside diameter: 32mm/40mm.

Naylor general purpose 45 degree duct bend

Naylor general purpose 90 degree duct bend

Naylor general purpose duct connector

Brett Martin Low Level 'P' Trap Gully 110mm

● Quick & Easy to Install.
● Lightweight.
● Durable.
● Manufactured in the UK.

Polypropylene designs allows section to be neatly cut out for downpipe.

Twinwall coupling, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 150mm. Angle: 45'.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 150mm. Angle: 90'.

MetroDrain 150mm diameter perforated drainage pipe, 6m long. Designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

It has a smooth bore for superior hydraulic flow and corrugated outer wall for additional strength. Lightweight for easier transport, handling and installation than concrete and claywear pipes. It is made with strong and durable HDPE with excellent resistance to differential settlement and minimal jointing compared with traditional materials.
The MetroDrain Premium Drainage system has been specified and installed on many civil engineering and construction projects.

MetroDrain Drainage Pipes. A new generation of HDPE high performance twin wall MetroDrain drainage pipes are designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twinwall sealing ring, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Polypropylene designs allows section to be neatly cut out for downpipe.

Twin-wall triple socket Y-junction for drainage pipes, made with HDPE. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 150mm. Angle: 45'.

Naylor Land Drainage universal fittings made from high density polythylene.

Naylor Agri-Drain Perforated Land Drainage is a single wall, corrugated pipe manufactured from high-density polyethylene allowing fast and easy installation and excellent water flow suitable for agricultural use to reduce surface water run-off‎.

45' ducting bend. Diameter: 168mm.

90' ducting bend. Diameter: 168mm.

Ducting connector. Diameter: 168mm.

Ducting pipe. Diameter:168mm. Length: 6m.

ACO plastic closing endcap is designed specifically for use with ACO HexDrain, HexDrain Brickslot and RainDrain drainage channels. Use to fully close the end of the channel to prevent leakage.

Hexdrain ACO accessory bag is for Hexdrain plastic drainage channel.

Each pack consists of:
2 x closing end caps - Used to seal off the end of drainage channels to prevent leakage.
1 x vertical outlet - 110mm diameter, to connect drainage channel to PVC-U pipes.
1 x leaf guard - To prevent leaves and debris from entering pipes or sump units.

Hexdrain drainage channel with plastic grid. It is manufactured from recycled polypropylene, ACO HexDrain is suitable for domestic applications up to Load Class A 15 - Pedestrian, cycleways, minimally trafficked areas (light domestic vehicles only).
The high quality ACO HexDrain channels clip together, allowing for quick and easy installation.

Hexdrain drainage channel with plastic grid. It is manufactured from recycled polypropylene, ACO HexDrain is suitable for domestic applications up to Load Class A 15 - Pedestrian, cycleways, minimally trafficked areas (light domestic vehicles only).
The high quality ACO HexDrain channels clip together, allowing for quick and easy installation.

The ACO sump unit acts as a filter to prevent any dirt or debris that collects in the drainage system from entering the storm drains.

ACO Hexdrain Corner Unit is used to join Hexdrain drains at the corners and is features inputs from any of the four sides, as well as 110mm pipe directly underneath.

Twinwall coupling, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 225mm. Angle: 45'.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 225mm. Angle: 90'.

MetroDrain Drainage Pipes. A new generation of HDPE high performance twin wall MetroDrain drainage pipes are designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twinwall sealing ring, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Brett Martin 280mm Dia. Chamber Base

● Quick & Easy to Install.
● Lightweight.
● Durable.
● 205mm invert depth.
● More directional options.

Brett Martin 280mm Dia. Chamber Riser

● Quick & Easy to Install.
● Lightweight.
● Durable.
● 185mm invert depth.
● High load bearing.

Brett Martin 300mm Square Double Seal

● Quick & Easy to Install.
● Lightweight.
● Durable.

Brett Martin 280mm Dia. 90° Chamber Base

● Quick & Easy to Install.
● Lightweight.
● Durable.
● More directional options on site.

Brett Martin 225mm 45° Double Socket Twinwall Bend with Seals

● Durable.
● Lightweight.
● BBA Certified.
● Multifit.

Prevents leaves and debris blocking outside drains.

Twinwall coupling, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 300mm. Angle: 45'.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 300mm. Angle: 90'.

MetroDrain Drainage Pipes. A new generation of HDPE high performance twin wall MetroDrain drainage pipes are designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twinwall sealing ring, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twin-wall triple socket Y-junction for drainage pipes, made with HDPE. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 300mm. Angle: 45'.

600mm x 450mm x 56mm galvanised steel cover and polypropyleme frame with SLK lifting keys. 10 tonne gross laden vehicle weight. Galvanised steel to BSEN ISO 1461.

Brett Martin 315mm Shallow Access Chamber Riser (185mm Invert)

● Quick & Easy to Install.
● Lightweight.
● Durable.

Brett Martin 315mm Shallow Access Chamber Base, includes 2 socket plugs (190mm Invert)

● 16+ connection possibilities.
● Watertight push-fit assembly.
● Easy to install.
● Lightweight.
● Durable.

Brett Martin 315mm diameter Shallow Access Chamber Sealed Square Lid (Pedestrian)

● Quick & Easy to Install.
● Lightweight.
● Airtight - double sealed & can be used for internal areas.
● 35kN loading capability.
● Height & tilt adjustable frame.

Brett Martin 315mm Frame & Driveway Lid

● Quick & Easy to Install.
● Lightweight.
● Durable.

Brett Martin 110mm Pvc Vitrified Clay Adapt

● Quick & Easy to Install.
● Lightweight.
● Durable.
● Manufactured in the UK.

Brett Martin 110mm Pvc Supersleeve Adaptor

● Quick & Easy to Install.
● Lightweight.
● Durable.
● Manufactured in the UK.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 375mm. Angle: 45'.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 375mm. Angle: 90'.

Twin-wall triple socket Y-junction for drainage pipes, made with HDPE. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 375mm. Angle: 45'.

This sump drain is part of the ACO raindrain product range of domestic channel drainage. It features a sediment bucket for collecting silt from collected rainwater and comes complete with galvalised steel
grating. Manufactured from polymer concrete and featuring galvanised steel grating, this sump unit is certified to Load Class B 125 making it ideal for pedestrian areas and home driveways.

Brett Martin 300mm 45° Bend Twinwall with Seals

● Durable.
● Lightweight.
● BBA Certified.
● Multifit.

Adaptor Coupling MAC is ideal for the external connection of all pipe systems
with different outside diameters. It connects all plain ended pipes with different
outside diameters and materials. It can be used for applications above and below ground as well as inside and outside of buildings. When changing nominal diameters, the flow direction needs consideration.

• Adaptor for different outside diameters
• For above and below ground
• External compression seal
• Resistant to 0.6 bar

Manufacturer:MISSION RUBBER
Pressure Tightness:0.6 bar wasser / -0.3 bar vacuum
Jetting Resistance:120 bar
Sealing Material:EPDM rubber with lock in place profile according to BS EN 681-1
Stainless Steel:AISI 304/1.4301, alternatively AISI 316/1.4404 according to BS EN 10088-2
Temperature Resistance:-40°C to +120°C, temporary max. temperature +160°C
Standard/Approval:BS EN 16397-2, CE16

Flexseal Drain Couplings are used to connect, repair and maintain drainage systems and other small diameter non-pressure
pipelines.
Applications:
• Can be used to connect plain ended pipes
• Repair of existing pipe systems by replacing short sections of pipe
• Connects short and cut lengths of pipe
• An inexpensive option when a shielded coupling is not required

Benefits
• Low cost solution to damaged drainage systems
• Easy to install
• Efficient, airtight and watertight connection

Brett Martin 6m Plain End Pipe 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Durable.
● Made in the UK.

Brett Martin Perforated Pipe 110mm X 6M

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.

Brett Martin Adjustable Bend 2 Way 110mm

● Quick & Easy to Install.
● Captive seal for easy jointing.
● Made from strong & durable PVC-U.
● Manufactured in the UK.

Brett Martin 87.5° Double Socket Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Captive seal for easy jointing.
● Made from strong & durable PVC-U.

Brett Martin 45° Double Socket Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Manufactured in the UK.

Brett Martin 2.5° Double Socket Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Manufactured in the UK.

Brett Martin 11.25° Double Socket Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Manufactured in the UK.

Brett Martin 67.5° Double Socket Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Manufactured in the UK.

Brett Martin 87.5° Triple Socket Branch 110mm X

● Quick & Easy to Install.
● Kite Marked.
● Captive seal for easy jointing.
● Durable.
● Manufactured in the UK.

Brett Martin 45° Triple Socket Branch 110mm

● Quick & Easy to Install.
● Captive seal for easy jointing.
● Kite Marked.
● Made from strong & durable PVC-U.
● Manufactured in the UK.

Brett Martin 87.5° Double Socket Long Radius Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Easy to Joint.
● Durable.
● Manufactured in the UK.

Brett Martin 110mm X 50mm Waste Adaptor

● Quick & Easy to Install.
● Lightweight.
● Durable.
● Manufactured in the UK.

Brett Martin 3m Single Socket Pipe 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Manufactured in the UK.

Twinwall coupling, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 450mm. Angle: 45'.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 450mm. Angle: 90'.

MetroDrain Drainage Pipes. A new generation of HDPE high performance twin wall MetroDrain drainage pipes are designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Brett Martin Waste Adaptor 32mm X 32mm

● Quick & Easy to Install.
● Robust & Lightweight.
● Easy to Joint.
● Manufactured in the UK.
● Durable.

ACO raindrain channel for domestic applications up to Load Class A 15, it comes complete with galvanised grid and fixings.
The high quality ACO RainDrain channels interlock allowing for quick and easy installation.

Brett Martin Waste Adaptor 32mm & 38mm

● Quick & Easy to Install.
● Robust & Lightweight.
● Easy to Joint.
● Manufactured in the UK.
● Durable.

Brett Martin Univ.W/Adapt.Bs5254 Pipe 110mm

● Quick & Easy to Install.
● Robust & Lightweight.
● Easy to Joint.
● Manufactured in the UK.
● Durable.

Brett Martin Universal Waste Adaptor (Socket) 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Manufactured in the UK.
● Durable.

Brett Martin Spare Socket Plug For B5494

● Quick & Easy to Install.
● Robust & Lightweight.
● Easy to Joint.

Brett Martin Double Socket PVC Coupler 110mm

● Quick & Easy to Install.
● Kite Marked.
● Easy to Joint.
● Lightweight.
● Manufactured in the UK.

Brett Martin Double Socket PVC Slip Coupler 110mm

● Quick & Easy to Install.
● Kite Marked.
● Captive seal for easy jointing.
● Lightweight.
● Manufactured in the UK.

Brett Martin Adjustable Bend Single 110mm

● Quick & Easy to Install.
● Captive seal for easy jointing.
● Manufactured in the UK.

Brett Martin Bend L/Radius P/E 110mmx87.5°

● Quick & Easy to Install.
● Suitable for 110mm drainage layouts.
● Manufactured in the UK.

Brett Martin Bend Long Radius P/E 110mmx45°

● Quick & Easy to Install.
● Suitable for 110mm drainage layouts.
● Manufactured in the UK.

Brett Martin Bend L/R P/E 110mm X 22.5°

● Quick & Easy to Install.
● Suitable for 110mm drainage layouts.
● Manufactured in the UK.

Brett Martin 87.5° Single Socket Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Captive seal for easy jointing.
● Manufactured in the UK.
● Durable.

Brett Martin 67.5° Single Socket Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Easy to Joint.
● Manufactured in the UK.
● Durable.

Brett Martin 45° Single Socket Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Easy to Joint.
● Manufactured in the UK.
● Durable.

Brett Martin 22.5° Single Socket Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Easy to Joint.
● Manufactured in the UK.
● Durable.

Brett Martin 11.25° Single Socket Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Easy to Joint.
● Manufactured in the UK.
● Durable.

Brett Martin Screw Access Cover 110mm

● Quick & Easy to Install.
● Kite Marked.
● Easy to Joint.
● Manufactured in the UK.
● Durable.

600mm x 450mm x 25mm single rubber sealed, pressed steel manhole cover with polypropylene frame. Suitable for pedestrian use only. Features include a pressed pattern lid, 25mm deep frame, lids underbraced where required, galvanised steel to BSEN ISO 1461.

Brett Martin 87.5° Double Socket Branch 110mm

● Quick & Easy to Install.
● Robust & Lightweight.
● Easy to Joint.
● Made in the UK.
● Durable.

Brett Martin 45° Double Socket Branch 110mm

● Quick & Easy to Install.
● Robust & Lightweight.
● Easy to Joint.
● Made in the UK.
● Durable.

Brett Martin Temporary Pipe Cap

● Quick & Easy to Install.
● Lightweight.
● Durable.
● Made in the UK.

Brett Martin Socket Plug 110mm

● Quick & Easy to Install.
● Robust & Lightweight.
● Easy to Joint.
● Made in the UK.
● Durable.

Brett Martin S.G. Adaptor Socket 110mm

● Quick & Easy to Install.
● Lightweight.
● Durable.
● Made in the UK.

600mm x 450mm x 25mm single rubber sealed, pressed steel manhole cover with polypropylene frame. 5 tonne gross laden vehicle weight - suitable for domestic drives. Features include a pressed pattern lid, 25mm deep frame, lids underbraced where required, galvanised steel to BSEN ISO 1461.

600mm x 450mm x 25mm double rubber sealed, pressed steel manhole cover with polypropylene frame. 5 tonne gross laden vehicle weight - suitable for domestic drives. Features include a pressed pattern lid, 25mm deep frame, lids underbraced where required, galvanised steel to BSEN ISO 1461.

600mm x 600mm x 25mm single rubber sealed, pressed steel manhole cover with steel frame. 5 tonne gross laden vehicle weight - suitable for domestic drives. Features include a pressed pattern lid, 25mm deep frame, lids underbraced where required, galvanised steel to BSEN ISO 1461.

600mm x 450mm x 30mm single rubber sealed, pressed steel manhole cover with polypropylene frame. 10 tonne gross laden vehicle weight - suitable for domestic drives/light traffic. Features include a pressed pattern lid, 30mm deep frame, lids underbraced where required, galvanised steel to BSEN ISO 1461.

600mm x 450mm x 25mm double rubber sealed, pressed steel manhole cover with polypropylene frame. 10 tonne gross laden vehicle weight - suitable for domestic drives/light traffic. Features include a pressed pattern lid, 25mm deep frame, lids underbraced where required, galvanised steel to BSEN ISO 1461.

600mm x 600mm x 25mm single rubber sealed, pressed steel manhole cover with steel frame. 10 tonne gross laden vehicle weight - suitable for domestic drives. Features include a pressed pattern lid, 25mm deep frame, lids underbraced where required, galvanised steel to BSEN ISO 1461.

Brett Martin 450mm diameter Chamber Riser (315mm Invert)

● Quick & Easy to Install.
● Lightweight.
● Easy to Joint.
● Robust.
● Made in the UK.

Brett Martin Chamber Riser Seal

● Quick & Easy to Install.
● Robust & Lightweight.
● Easy to Joint.
● Durable.
● Made in the UK.

Brett Martin 450mm dia Chamber Base (225mm invert) with 3 socket plugs x 110mm

● Quick & Easy to Install.
● Robust & Lightweight.
● Easy to Joint.
● Durable.
● Made in the UK.

Brett Martin 110mm Alloy Rodding Points

● Quick & Easy to Install.
● Suitable for 110mm drainage layouts.

Brett Martin 110mm Sealed Alloy Rod. Point

● Quick & Easy to Install.
● Very strong.
● Suitable for 110mm drainage layouts.

600mm x 450mm x 30mm single rubber sealed, pressed steel manhole cover with polypropylene frame. 25 tonne gross laden vehicle weight. Features include a pressed pattern lid, 30mm deep frame, lids underbraced where required, galvanised steel to BSEN ISO 1461.

Brett Martin 450mm diameter Chamber Base, includes 3 socket plugs, 160mm outlet (225mm Invert)

● Quick & Easy to Install.
● Lightweight.
● Suitable for 110mm drainage layouts.
● Robust.
● Made in the UK.

Twinwall coupling, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 600mm. Angle: 45'.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 600mm. Angle: 90'.

MetroDrain Drainage Pipes. A new generation of HDPE high performance twin wall MetroDrain drainage pipes are designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twinwall sealing ring, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Brett Martin 87.5° Double Socket Bend 160mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Made in the UK.

Brett Martin 45° Double Socket Bend 160mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Made in the UK.

Brett Martin 22.5° Double Socket Bend 160mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Made in the UK.

Brett Martin 11.25° Double Socket Bend 160mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Made in the UK.

Brett Martin 87.5° Triple Socket Branch 160mm x 160mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Made in the UK.

Brett Martin 45° Triple Socket Branch 160mm x 160mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Made in the UK.

MetroCoil Singlewall Ducting – Yellow Perforated Gas Duct Pipe. Kitemarked to BS4962, complies with TRANSCO specification. Coils supplied with coupling.

Polypropylene single seal PPI access cover and frame. 3.5 tonne load - specially designed for use in gardens and driveways. Opening: 450mm diameter. Overall frame: 548mm diameter. Frame depth: 58mm with 20mm PPI locator. Made with durable polypropylene, full single seal and unique captive locking. It has a one-way fit cover and frame with indicator. Lids have a unbique captive locking system and are child safety assured,

Brett Martin Plastic 450mm Dia Square Lid & Frame

● Quick & Easy to Install.
● Robust & Lightweight.
● Easy to Joint.
● High load bearing.
● Made in the UK.

Brett Martin Yard Gully With Integral Trap

● Quick & Easy to Install.
● Durable.
● Lightweight.
● Trapped Outlet.
● Made in the UK.

Naylor Printed Electric Cable Duct supplied with preinstalled draw sting and coupling.

Outside diameter: 63mm. Made with recycled plastic.

Brett Martin 3m Single Socket Pipe 160mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Made in the UK.

Brett Martin 6m Single Socket Pipe 160mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Made in the UK.

Brett Martin Double Socket PVC Coupler 160mm

● Quick & Easy to Install.
● Kite Marked.
● Captive seal for easy jointing.
● Durable.
● Made in the UK.

Brett Martin Double Socket PVC Slip Coupler 160mm

● Quick & Easy to Install.
● Kite Marked.
● Captive seal for easy jointing.
● Durable.
● Made in the UK.

Brett Martin Bend L.Radius P/E 160mmx87.5°

● Quick & Easy to Install.

Brett Martin 67.5° Single Socket Bend 160mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Durable.
● Made in the UK.

Brett Martin 87.5° Single Socket Bend 160mm

● Quick & Easy to Install.
● Kite Marked.
● Captive seal for easy jointing.
● Made in the UK.

Brett Martin 45° Single Socket Bend 160mm

● Quick & Easy to Install.
● Kite Marked.
● Captive seal for easy jointing.
● Made in the UK.

Brett Martin 87.5° Double Socket Branch 160 x 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Durable.
● Made in the UK.

Brett Martin 87.5° Triple Socket Branch 160 x 110mm

● Quick & Easy to Install.

Brett Martin 45° Triple Socket Branch 160mm x 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Durable.
● Made in the UK.

Brett Martin 87.5° Double Socket Branch 160mm x 160mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Durable.
● Made in the UK.

Brett Martin 47.5° Double Socket Branch 160mm x 160mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Durable.
● Made in the UK.

Brett Martin Single Socket Level Invert Reducer 110mm

● Suitable for 110mm drainage layouts.
● Kite Marked.
● Captive seal for easy jointing.
● High strength.
● Made in the UK.

Brett Martin 22.5° Single Socket Bend 160mm

● Quick & Easy to Install.
● Kite Marked.
● Captive seal for easy jointing.
● Durable.
● Made in the UK.

Brett Martin 11.25° Single Socket Bend 160mm

● Quick & Easy to Install.
● Kite Marked.
● Captive seal for easy jointing.
● Durable.
● Made in the UK.

House concrete inspection chamber section measuring 750 x 600 x 150mm. Each section has a tongue and groove joint and can be sealed with a sand and cement mortar or bitumen sealant, in the same fashion as a circular manhole and chamber ring. Stack chambers to reach the desired height. Lids sold separately.

House concrete inspection chamber section measuring 750 x 600 x 250mm. Each section has a tongue and groove joint and can be sealed with a sand and cement mortar or bitumen sealant, in the same fashion as a circular manhole and chamber ring. Stack chambers to reach the desired height. Lids sold separately.

Naylor Land Drainage universal fittings made from high density polythylene.

Brett Martin Solvent Cement 125ml

Brett Martin solvent cement for creating solid connections between pipework. CE Marked.

Brett Martin Solvent Cement 250ml

Brett Martin solvent cement for creating solid connections between pipework. CE Marked.

Brett Martin Solvent Cement 500ml

Brett Martin solvent cement for creating solid connections between pipework. CE Marked.

Brett Martin Solvent Cleaner 250ml

Brett Martinn solvent cleaner for removing solvent and cleaning any pipework and fittings or residue. For use with PVC pipework and fittings. CE Marked.

Brett Martin 200mm Sealing Plate Die Cast

Round Sealing Plates are manufactured in the UK to BS EN 1401

Brett Martin Silicone Spray Lubricant

Brett Martinn Silicone Lubricant Spray
Allows easy jointing of pipes & fittings.

Hexdrain brickslot is a discreet slot drainage channel for domestic applications and is suitable for pedestrian and vehicle traffic up to Load Class A 15.
The channel comes complete with an offset slotted grating, ideal for block paving up to and including 60mm.
The high quality ACO HexDrain channels clip together, allowing for quick and easy installation.

ACO plastic closing endcap is designed specifically for use with RainDrain drainage concrete channels. Use to fully close the end of the channel to prevent leakage.

Round access cover with 433mm diameter opening. Overall frame measures 510 x 510 x 25mm. Weighs 24kg. Manufactured to BSEN124 class B125. BSI Kitemarked for third party quality assurance. Suitable for slow moving traffic with 12.5 tonne safe test load. Made with ductile iron to ISO 1083 for improved weight to strength ratio. Black coated finish.

Rectangular access cover with 600 x 450mm opening. Overall frame measures 692 x 542 x 40mm. Weighs 28kg. Manufactured to BSEN124 class B125. BSI Kitemarked for third party quality assurance. Suitable for slow moving traffic with 12.5 tonne safe test load. Made with ductile iron to ISO 1083 for improved weight to strength ratio. Black coated finish.

Square access cover with 600 x 600mm opening. Overall frame measures 690 x 690 x 40mm. Weighs 34kg. Manufactured to BSEN124 class B125. BSI Kitemarked for third party quality assurance. Suitable for slow moving traffic with 12.5 tonne safe test load. Made with ductile iron to ISO 1083 for improved weight to strength ratio. Black coated finish.

Brett Martin StormCrate55 0.25m³ Crate + 4 Connectors

● Quick & Easy to Install.
● Robust & Lightweight.
● Load bearing.
● Easy to calculate crates required per m².
● Made from recycled material.

Brett Martin Cable Duct 53.9mm X 6M

● Quick & Easy to Install.
● Robust & Lightweight.
● Easy to Joint.

Brett Martin Duct Bend 90° L/R 53.9mm

● Quick & Easy to Install.
● Robust & Lightweight.
● Easy to Joint.

Brett Martin Duct Bend 45° L/R 53.9mm

● Quick & Easy to Install.
● Robust & Lightweight.
● Easy to Joint.

Brett Martin Brett Duct Coupling 53.9mm

● Quick & Easy to Install.
● Robust & Lightweight.
● Easy to Joint.

KD100 675 x 675 x 100mm heavy duty ductile iron access covers and frame. Usage Group 4- carriageways and main roads for fast moving traffic. Manufactured to BS EN124 Class D400. Highways Agency HA104/02 compliant when marked ultra. BS 7903:1997 compliant when marked ultra. 40 Tonne safe test load. Anti-movement technology for improved bonding to bedding material. Non-rock three point suspension for added stability and silent operation. Ductile iron for improved weight to strength ratio
Black coated finish.

450mm x 450mm x 58mm deep medium duty recessed tray type access cover and frame. 10 tonne gross laden vehicle weight, when infilled. Double rubber sealed, and locking.

KD100 600 x 600 x 100mm heavy duty ductile iron access covers and frame. Usage Group 4- carriageways and main roads for fast moving traffic. Manufactured to BS EN124 Class D400. Highways Agency HA104/02 compliant when marked ultra. BS 7903:1997 compliant when marked ultra. 40 Tonne safe test load. Anti-movement technology for improved bonding to bedding material. Non-rock three point suspension for added stability and silent operation. Ductile iron for improved weight to strength ratio
Black coated finish.

KD100 675 x 675 x 100mm heavy duty ductile iron access covers and frame. Usage Group 4- carriageways and main roads for fast moving traffic. Manufactured to BS EN124 Class D400. Highways Agency HA104/02 compliant when marked ultra. BS 7903:1997 compliant when marked ultra. 40 Tonne safe test load. Anti-movement technology for improved bonding to bedding material. Non-rock three point suspension for added stability and silent operation. Ductile iron for improved weight to strength ratio
Black coated finish.

Heavy duty ductile iron, hinged gully gratings and frame measuring 400 x 400 x 100mm.
Use for Group 4 carriageways and main roads for fast moving traffic. Manufactured to BS EN124 Class D400. Kitemarked for third party assurance of quality. Compliant with design manual for roads and bridges Vol 4, Section 2, part 5. HA104/02. Anti-movement technology for improved bonding to bedding material. 80mm depth of cover insertion into frames. 75mm solid bedding width.
40 Tonne Safe Test Load. Non-rock captive reversible side hinge for increased stability and silent operation. Pedestrianised design on KD50DP & KD51DP products- pushchair/trolley and cycle friendly. Ductile iron for improved weight to strength ratio. Black coated finish.

600 x 450 x 80mm galvanised steel recessed cover and polypropylene frame. SLK Keys. 10 tonne load.

600 x 450 x 80mm galvanised steel recessed cover and frame. SLK Keys. 5 tonne load.

600 x 450 x 65mm galvanised steel recessed cover and polypropylene frame. SLK Keys. 5 tonne load.

600mm x 600mm x 25mm galvanised steel cover and frame, locked and double steel sealed. 5 tonne gross laden vehicle weight. Features include a pressed pattern lid, 25mm deep frame, lids underbraced where required, galvanised steel to BSEN ISO 1461.

The Threshold Drain provides a solution for The Building Regulations Approved Document M, which covers access and facilities for disabled people. The drain channel is installed flush to new or existing thresholds, allowing the required level access to drain easily.

A 130mm thick wide wall chamber, in combination with the Easi-Base™ unit, provides a sealed watertight manhole system. This robust design means that the requirement for a concrete surround is eliminated.
Quick and easy installation
Watertight structure
Safe anchor lifting system (spherical head lifting system)
Greater cost savings associated with using precast concrete over a traditional system
No concrete backfill required, in accordance with ‘Sewers for Adoption’ 7th edition
More environmentally friendly than a traditional system, almost 40% less carbon emitted during the concrete casting process
Significant reduction in health and safety risks associated with using precast concrete

Please note: Wide Wall Manhole Chambers are manufactured with 3 x 45mm diameter lifting points to facilitate the safe anchor lifting system (spherical head lifting system).

A 130mm thick wide wall chamber, in combination with the Easi-Base™ unit, provides a sealed watertight manhole system. This robust design means that the requirement for a concrete surround is eliminated.
Quick and easy installation
Watertight structure
Safe anchor lifting system (spherical head lifting system)
Greater cost savings associated with using precast concrete over a traditional system
No concrete backfill required, in accordance with ‘Sewers for Adoption’ 7th edition
More environmentally friendly than a traditional system, almost 40% less carbon emitted during the concrete casting process
Significant reduction in health and safety risks associated with using precast concrete

Please note: Wide Wall Manhole Chambers are manufactured with 3 x 45mm diameter lifting points to facilitate the safe anchor lifting system (spherical head lifting system).