Below Ground Drainage

Brett Martin Temporary Pipe Cap

● Quick & Easy to Install.
● Lightweight.
● Durable.
● Made in the UK.

Twinwall coupling, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Brett Martin Chamber Riser Seal

● Quick & Easy to Install.
● Robust & Lightweight.
● Easy to Joint.
● Durable.
● Made in the UK.

Adaptor Coupling MAC is ideal for the external connection of all pipe systems
with different outside diameters. It connects all plain ended pipes with different
outside diameters and materials. It can be used for applications above and below ground as well as inside and outside of buildings. When changing nominal diameters, the flow direction needs consideration.

• Adaptor for different outside diameters
• For above and below ground
• External compression seal
• Resistant to 0.6 bar

Manufacturer:MISSION RUBBER
Pressure Tightness:0.6 bar wasser / -0.3 bar vacuum
Jetting Resistance:120 bar
Sealing Material:EPDM rubber with lock in place profile according to BS EN 681-1
Stainless Steel:AISI 304/1.4301, alternatively AISI 316/1.4404 according to BS EN 10088-2
Temperature Resistance:-40°C to +120°C, temporary max. temperature +160°C
Standard/Approval:BS EN 16397-2, CE16

Drainage Coupling MDC is ideal solution for the external connection of all pipe systems with same outside diameters
The Drainage Coupling MDC connects all plain ended pipes with same outside diameters and materials. It can be used for applications above and below ground as well as inside and outside of buildings.

• Coupling for same outside diameters
• For above and below ground
• External compression seal
• Resistant to 0.6 bar

Manufacturer:MISSION RUBBER
Pressure Tightness:0.6 bar wasser / -0.3 vacuum
Jetting Resistance:120 bar
Sealing Material:EPDM or Nitrile (NBR) rubber with lock in place profile according to BS EN 681-1
Stainless Steel:AISI 304/1.4301, alternatively AISI 316/1.4404 according to BS EN 10088-2
Temperature Resistance:-40°C to +120°C, temporary max. temperature +160°C
Standard/Approval: BS EN 16397-2, CE16

MetroDuct Twinwall Bends are supplied plain ended. Please order couplings separately. Inside/Outside diameter: 94mm/110mm.

MetroDuct Twinwall Bends are supplied plain ended. Please order couplings separately. Inside/Outside diameter: 94mm/110mm.

Naylor Densleeve Couplings

Flexseal Drain Couplings are used to connect, repair and maintain drainage systems and other small diameter non-pressure
pipelines.
Applications:
• Can be used to connect plain ended pipes
• Repair of existing pipe systems by replacing short sections of pipe
• Connects short and cut lengths of pipe
• An inexpensive option when a shielded coupling is not required

Benefits
• Low cost solution to damaged drainage systems
• Easy to install
• Efficient, airtight and watertight connection

ACO plastic closing endcap is designed specifically for use with ACO HexDrain, HexDrain Brickslot and RainDrain drainage channels. Use to fully close the end of the channel to prevent leakage.

ACO plastic closing endcap is designed specifically for use with RainDrain drainage concrete channels. Use to fully close the end of the channel to prevent leakage.

Twinwall sealing ring, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Adaptor Coupling MAC is ideal for the external connection of all pipe systems
with different outside diameters. It connects all plain ended pipes with different
outside diameters and materials. It can be used for applications above and below ground as well as inside and outside of buildings. When changing nominal diameters, the flow direction needs consideration.

• Adaptor for different outside diameters
• For above and below ground
• External compression seal
• Resistant to 0.6 bar

Manufacturer:MISSION RUBBER
Pressure Tightness:0.6 bar wasser / -0.3 bar vacuum
Jetting Resistance:120 bar
Sealing Material:EPDM rubber with lock in place profile according to BS EN 681-1
Stainless Steel:AISI 304/1.4301, alternatively AISI 316/1.4404 according to BS EN 10088-2
Temperature Resistance:-40°C to +120°C, temporary max. temperature +160°C
Standard/Approval:BS EN 16397-2, CE16

Outside diameter: 110mm. Made with recycled plastic.

Adaptor Coupling MAC is ideal for the external connection of all pipe systems
with different outside diameters. It connects all plain ended pipes with different
outside diameters and materials. It can be used for applications above and below ground as well as inside and outside of buildings. When changing nominal diameters, the flow direction needs consideration.

• Adaptor for different outside diameters
• For above and below ground
• External compression seal
• Resistant to 0.6 bar

Manufacturer:MISSION RUBBER
Pressure Tightness:0.6 bar wasser / -0.3 bar vacuum
Jetting Resistance:120 bar
Sealing Material:EPDM rubber with lock in place profile according to BS EN 681-1
Stainless Steel:AISI 304/1.4301, alternatively AISI 316/1.4404 according to BS EN 10088-2
Temperature Resistance:-40°C to +120°C, temporary max. temperature +160°C
Standard/Approval:BS EN 16397-2, CE16

Drainage Coupling MDC is ideal solution for the external connection of all pipe systems with same outside diameters
The Drainage Coupling MDC connects all plain ended pipes with same outside diameters and materials. It can be used for applications above and below ground as well as inside and outside of buildings.

• Coupling for same outside diameters
• For above and below ground
• External compression seal
• Resistant to 0.6 bar

Manufacturer:MISSION RUBBER
Pressure Tightness:0.6 bar wasser / -0.3 vacuum
Jetting Resistance:120 bar
Sealing Material:EPDM or Nitrile (NBR) rubber with lock in place profile according to BS EN 681-1
Stainless Steel:AISI 304/1.4301, alternatively AISI 316/1.4404 according to BS EN 10088-2
Temperature Resistance:-40°C to +120°C, temporary max. temperature +160°C
Standard/Approval: BS EN 16397-2, CE16

Outside diameter: 63mm. Made with recycled plastic.

Prevents leaves and debris blocking outside drains.

Polypropylene designs allows section to be neatly cut out for downpipe.

Polypropylene designs allows section to be neatly cut out for downpipe.