Below Ground Drainage

100 x 600 x 600 adjusting unit seating ring by F.P. McCann. The concrete ring sits on top of a manhole cover, eliminating the need to lay engineering bricks. Its comprehensive strength is comparable to Class B engineering bricks.

100 x 675 x 675 adjusting unit seating ring by F.P. McCann. The concrete ring sits on top of a manhole cover, eliminating the need to lay engineering bricks. Its comprehensive strength is comparable to Class B engineering bricks.

Brett Martin Back Inlet Roddable Gully Round Grid

● Quick & Easy to Install.
● Suitable for pedestrian areas only.
● Easy access for rodding.
● Removal basket, dip-tube & trap.
● Double trapped to eliminate .

Brett Martin Back Inlet Roddable Gully Rectangular Grid

● Quick & Easy to Install.
● Suitable for pedestrian areas only.
● Easy to Joint.
● Easy access for rodding.
● Double trapped to eliminate .

Brett Martin Back Inlet Roddable Gully Square Grid

● Quick & Easy to Install.
● Suitable for pedestrian areas only.
● Easy to Joint.
● Easy access for rodding.
● Double trapped to eliminate .

Brett Martin Round Hopper And Grid

● Quick & Easy to Install.
● Suitable for pedestrian areas only.
● Easy to Joint.
● Easy access for rodding.
● Double trapped to eliminate .

Brett Martin Rectangular Hopper And Grid

● Quick & Easy to Install.
● Suitable for pedestrian areas only.
● Easy to Joint.
● Easy access for rodding.
● Double trapped to eliminate .

Brett Martin Square Hopper And Grid

● Quick & Easy to Install.
● Suitable for pedestrian areas only.
● Easy to Joint.
● Easy access for rodding.
● Double trapped to eliminate .

Brett Martin Back Inlet Gully Raising Piece

● Suitable for 110mm drainage layouts.
● Lightweight.
● Easy to install.
● Durable.
● Manufactured in the UK.

Brett Martin Paving Collar

● For use with square hopper (B1006).
● Lightweight.
● Easy to install.
● Durable.
● Manufactured in the UK.

Naylor Densleeve underground clay drainage system of plain-end vitrified clay pipes and fittings with flexible sleeve couplings, was developed for building drainage and associated sewerage and is manufactured to comply with the stringent requirements of BS EN295. Sizes are DN100-DN300.

Naylor Densleeve Couplings

Naylor Agri-Drain Perforated Land Drainage is a single wall, corrugated pipe manufactured from high-density polyethylene allowing fast and easy installation and excellent water flow suitable for agricultural use to reduce surface water run-off‎.

Naylor Agri-Drain Perforated Land Drainage is a single wall, corrugated pipe manufactured from high-density polyethylene allowing fast and easy installation and excellent water flow suitable for agricultural use to reduce surface water run-off‎.

Naylor Agri-Drain Perforated Land Drainage is a single wall, corrugated pipe manufactured from high-density polyethylene allowing fast and easy installation and excellent water flow suitable for agricultural use to reduce surface water run-off‎.

Brett Martin Low Trapped Gully 110mm

● Suitable for 110mm drainage layouts.
● Lightweight.
● Easy to install.
● Durable.
● Manufactured in the UK.

Brett Martin Hopp.Integral (Including Grid)

● Quick & Easy to Install.
● Suitable for 110mm drainage layouts.
● Durable.
● Manufactured in the UK.

Brett Martin Sq Hopper 160mm Solv Socket

● Quick & Easy to Install.
● Removable grid cover.
● Durable.
● Manufactured in the UK.

Brett Martin Hopp. Sq. 160 X 110mm + Grid

● Quick & Easy to Install.
● Removable grid cover.
● Durable.
● Manufactured in the UK.

Brett Martin Hopp.Sq.160X110mm+Back Inl+Gd

● Quick & Easy to Install.
● Lightweight.
● Durable.
● Manufactured in the UK.

Brett Martin Hopper Extension Square

● Quick & Easy to Install.
● Lightweight.
● Durable.
● Manufactured in the UK.

MetroDuct Twinwall Bends are supplied plain ended. Please order couplings separately. Inside/Outside diameter: 94mm/110mm.

MetroDuct Twinwall Bends are supplied plain ended. Please order couplings separately. Inside/Outside diameter: 94mm/110mm.

Outside diameter: 110mm. Made with recycled plastic.

Black MetroDuct Twinwall Coiled Ducting is supplied with pre-installed draw sting and coupling. Length: 50m. Inside/Outside diameter: 94mm/110mm.

Orange MetroDuct Twinwall Coiled Ducting is supplied with pre-installed draw sting and coupling. Length: 50m. Inside/Outside diameter: 32mm/40mm.

Naylor general purpose 45 degree duct bend

Naylor general purpose 90 degree duct bend

Naylor general purpose duct connector

Brett Martin Low Level 'P' Trap Gully 110mm

● Quick & Easy to Install.
● Lightweight.
● Durable.
● Manufactured in the UK.

Polypropylene designs allows section to be neatly cut out for downpipe.

Twinwall coupling, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 150mm. Angle: 45'.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 150mm. Angle: 90'.

MetroDrain 150mm diameter perforated drainage pipe, 6m long. Designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

It has a smooth bore for superior hydraulic flow and corrugated outer wall for additional strength. Lightweight for easier transport, handling and installation than concrete and claywear pipes. It is made with strong and durable HDPE with excellent resistance to differential settlement and minimal jointing compared with traditional materials.
The MetroDrain Premium Drainage system has been specified and installed on many civil engineering and construction projects.

MetroDrain Drainage Pipes. A new generation of HDPE high performance twin wall MetroDrain drainage pipes are designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twinwall sealing ring, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Polypropylene designs allows section to be neatly cut out for downpipe.

Twin-wall triple socket Y-junction for drainage pipes, made with HDPE. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 150mm. Angle: 45'.

Naylor Land Drainage universal fittings made from high density polythylene.

Naylor Agri-Drain Perforated Land Drainage is a single wall, corrugated pipe manufactured from high-density polyethylene allowing fast and easy installation and excellent water flow suitable for agricultural use to reduce surface water run-off‎.

45' ducting bend. Diameter: 168mm.

90' ducting bend. Diameter: 168mm.

Ducting connector. Diameter: 168mm.

Ducting pipe. Diameter:168mm. Length: 6m.

ACO plastic closing endcap is designed specifically for use with ACO HexDrain, HexDrain Brickslot and RainDrain drainage channels. Use to fully close the end of the channel to prevent leakage.

Hexdrain ACO accessory bag is for Hexdrain plastic drainage channel.

Each pack consists of:
2 x closing end caps - Used to seal off the end of drainage channels to prevent leakage.
1 x vertical outlet - 110mm diameter, to connect drainage channel to PVC-U pipes.
1 x leaf guard - To prevent leaves and debris from entering pipes or sump units.

Hexdrain drainage channel with plastic grid. It is manufactured from recycled polypropylene, ACO HexDrain is suitable for domestic applications up to Load Class A 15 - Pedestrian, cycleways, minimally trafficked areas (light domestic vehicles only).
The high quality ACO HexDrain channels clip together, allowing for quick and easy installation.

Hexdrain drainage channel with plastic grid. It is manufactured from recycled polypropylene, ACO HexDrain is suitable for domestic applications up to Load Class A 15 - Pedestrian, cycleways, minimally trafficked areas (light domestic vehicles only).
The high quality ACO HexDrain channels clip together, allowing for quick and easy installation.

The ACO sump unit acts as a filter to prevent any dirt or debris that collects in the drainage system from entering the storm drains.

ACO Hexdrain Corner Unit is used to join Hexdrain drains at the corners and is features inputs from any of the four sides, as well as 110mm pipe directly underneath.

Twinwall coupling, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 225mm. Angle: 45'.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 225mm. Angle: 90'.

MetroDrain Drainage Pipes. A new generation of HDPE high performance twin wall MetroDrain drainage pipes are designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twinwall sealing ring, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Brett Martin 280mm Dia. Chamber Base

● Quick & Easy to Install.
● Lightweight.
● Durable.
● 205mm invert depth.
● More directional options.

Brett Martin 280mm Dia. Chamber Riser

● Quick & Easy to Install.
● Lightweight.
● Durable.
● 185mm invert depth.
● High load bearing.

Brett Martin 300mm Square Double Seal

● Quick & Easy to Install.
● Lightweight.
● Durable.

Brett Martin 280mm Dia. 90° Chamber Base

● Quick & Easy to Install.
● Lightweight.
● Durable.
● More directional options on site.

Brett Martin 225mm 45° Double Socket Twinwall Bend with Seals

● Durable.
● Lightweight.
● BBA Certified.
● Multifit.

Prevents leaves and debris blocking outside drains.

Twinwall coupling, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 300mm. Angle: 45'.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 300mm. Angle: 90'.

MetroDrain Drainage Pipes. A new generation of HDPE high performance twin wall MetroDrain drainage pipes are designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twinwall sealing ring, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twin-wall triple socket Y-junction for drainage pipes, made with HDPE. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 300mm. Angle: 45'.

600mm x 450mm x 56mm galvanised steel cover and polypropyleme frame with SLK lifting keys. 10 tonne gross laden vehicle weight. Galvanised steel to BSEN ISO 1461.

Brett Martin 315mm Shallow Access Chamber Riser (185mm Invert)

● Quick & Easy to Install.
● Lightweight.
● Durable.

Brett Martin 315mm Shallow Access Chamber Base, includes 2 socket plugs (190mm Invert)

● 16+ connection possibilities.
● Watertight push-fit assembly.
● Easy to install.
● Lightweight.
● Durable.

Brett Martin 315mm diameter Shallow Access Chamber Sealed Square Lid (Pedestrian)

● Quick & Easy to Install.
● Lightweight.
● Airtight - double sealed & can be used for internal areas.
● 35kN loading capability.
● Height & tilt adjustable frame.

Brett Martin 315mm Frame & Driveway Lid

● Quick & Easy to Install.
● Lightweight.
● Durable.

Brett Martin 110mm Pvc Vitrified Clay Adapt

● Quick & Easy to Install.
● Lightweight.
● Durable.
● Manufactured in the UK.

Brett Martin 110mm Pvc Supersleeve Adaptor

● Quick & Easy to Install.
● Lightweight.
● Durable.
● Manufactured in the UK.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 375mm. Angle: 45'.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 375mm. Angle: 90'.

Twin-wall triple socket Y-junction for drainage pipes, made with HDPE. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 375mm. Angle: 45'.

This sump drain is part of the ACO raindrain product range of domestic channel drainage. It features a sediment bucket for collecting silt from collected rainwater and comes complete with galvalised steel
grating. Manufactured from polymer concrete and featuring galvanised steel grating, this sump unit is certified to Load Class B 125 making it ideal for pedestrian areas and home driveways.

Brett Martin 300mm 45° Bend Twinwall with Seals

● Durable.
● Lightweight.
● BBA Certified.
● Multifit.

Adaptor Coupling MAC is ideal for the external connection of all pipe systems
with different outside diameters. It connects all plain ended pipes with different
outside diameters and materials. It can be used for applications above and below ground as well as inside and outside of buildings. When changing nominal diameters, the flow direction needs consideration.

• Adaptor for different outside diameters
• For above and below ground
• External compression seal
• Resistant to 0.6 bar

Manufacturer:MISSION RUBBER
Pressure Tightness:0.6 bar wasser / -0.3 bar vacuum
Jetting Resistance:120 bar
Sealing Material:EPDM rubber with lock in place profile according to BS EN 681-1
Stainless Steel:AISI 304/1.4301, alternatively AISI 316/1.4404 according to BS EN 10088-2
Temperature Resistance:-40°C to +120°C, temporary max. temperature +160°C
Standard/Approval:BS EN 16397-2, CE16

Flexseal Drain Couplings are used to connect, repair and maintain drainage systems and other small diameter non-pressure
pipelines.
Applications:
• Can be used to connect plain ended pipes
• Repair of existing pipe systems by replacing short sections of pipe
• Connects short and cut lengths of pipe
• An inexpensive option when a shielded coupling is not required

Benefits
• Low cost solution to damaged drainage systems
• Easy to install
• Efficient, airtight and watertight connection

Brett Martin 6m Plain End Pipe 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Durable.
● Made in the UK.

Brett Martin Perforated Pipe 110mm X 6M

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.

Brett Martin Adjustable Bend 2 Way 110mm

● Quick & Easy to Install.
● Captive seal for easy jointing.
● Made from strong & durable PVC-U.
● Manufactured in the UK.

Brett Martin 87.5° Double Socket Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Captive seal for easy jointing.
● Made from strong & durable PVC-U.

Brett Martin 45° Double Socket Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Manufactured in the UK.

Brett Martin 2.5° Double Socket Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Manufactured in the UK.

Brett Martin 11.25° Double Socket Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Manufactured in the UK.

Brett Martin 67.5° Double Socket Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Manufactured in the UK.

Brett Martin 87.5° Triple Socket Branch 110mm X

● Quick & Easy to Install.
● Kite Marked.
● Captive seal for easy jointing.
● Durable.
● Manufactured in the UK.

Brett Martin 45° Triple Socket Branch 110mm

● Quick & Easy to Install.
● Captive seal for easy jointing.
● Kite Marked.
● Made from strong & durable PVC-U.
● Manufactured in the UK.

Brett Martin 87.5° Double Socket Long Radius Bend 110mm

● Quick & Easy to Install.
● Kite Marked.
● Easy to Joint.
● Durable.
● Manufactured in the UK.

Brett Martin 110mm X 50mm Waste Adaptor

● Quick & Easy to Install.
● Lightweight.
● Durable.
● Manufactured in the UK.

Brett Martin 3m Single Socket Pipe 110mm

● Quick & Easy to Install.
● Kite Marked.
● Lightweight.
● Easy to Joint.
● Manufactured in the UK.

Twinwall coupling, designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 450mm. Angle: 45'.

Twin-wall dual socket HDPE drainage pipes bends requiring two seals per joint. Designed for use with all non-pressure, surface and sub-surface storm water drainage application. Internal diameter: 450mm. Angle: 90'.

MetroDrain Drainage Pipes. A new generation of HDPE high performance twin wall MetroDrain drainage pipes are designed for use with all non-pressure, surface and sub-surface storm water drainage applications.

Brett Martin Waste Adaptor 32mm X 32mm

● Quick & Easy to Install.
● Robust & Lightweight.
● Easy to Joint.
● Manufactured in the UK.
● Durable.